Science and Technology Department of Zhejiang Province


Department of Science and Technology of Zhejiang Province

Notice on the Evaluation Work of National Science and Technology-based Small and Medium-sized Enterprises in 2023

Evaluation of the work of the notice

According to the Measures for the Evaluation of Science and Technology-based Small and Medium-sized Enterprises (Guo Ke Fa Zheng [2017] No. 115), the Circular of the Ministry of Science and Technology and the State Administration of Taxation on Matters Concerning the Evaluation of Science and Technology-based Small and Medium-sized Enterprises (Guo Ke Fa Huo [2018] No. 11), and the Guidelines for Evaluation Services of Science and Technology-based Small and Medium-sized Enterprises (Guo Ke Huo Zi [2022] No. 67), the province was decided to carry out the 2023 evaluation of national science and technology-based small and medium-sized enterprises. It is decided to carry out the evaluation of national science and technology-based small and medium-sized enterprises in the province (except Ningbo, the same hereinafter) in 2023. The relevant matters are hereby notified as follows. (1) National science and technology-based small and medium-sized enterprises must also meet the following conditions: 1. resident enterprises registered in Zhejiang Province; 2. total number of employees does not exceed 500, annual sales revenue does not exceed 200 million yuan, and total assets do not exceed 200 million yuan; 3. products and services provided by the enterprise do not belong to the prohibited, restricted and eliminated categories stipulated by the state; 4. the enterprise does not have major safety, major quality accidents and serious environmental protection incidents in the previous year and the current year; 5. the enterprise does not have any major safety, major quality accidents and serious environmental protection incidents in the previous year and the current year. (4) The enterprise does not have major safety, major quality accidents and serious environmental violations, serious breach of trust in scientific research in the previous year and the current year, and the enterprise is not listed in the list of business anomalies and serious violations of the law and breach of trust in the list of enterprises; (5) The enterprise scores no less than 60 points in the comprehensive evaluation according to the evaluation index of science and technology-based small and medium-sized enterprises and the score of the index of scientific and technological personnel shall not be zero.
(b) Enterprises meeting the above conditions 1-4 can be directly recognized as national technology-based small and medium-sized enterprises if one of the following conditions is met at the same time: 1. having a high-tech enterprise qualification certificate within the validity period; 2. having received national scientific and technological awards within the past five years; 3. having a recognized R&D institution at or above the provincial or ministerial level; 4. having taken the lead in formulating international standards or national standards or industrial standards within the past five years. International standards, national standards or industry standards.
Reporting Procedures 
The province's national science and technology-based small and medium-sized enterprise evaluation using independent evaluation of enterprises, district municipal Science and Technology Bureau to confirm the audit, the Provincial Science and Technology Department of the announcement of the workflow of the database. 
(A) enterprises against the national science and technology-based small and medium-sized enterprise evaluation conditions for self-assessment
Evaluation, meet the conditions, through the zhejiang government service network login "science and technology enterprise growth online" (https://qyyffw.kjt.zj.gov.cn/fwzxpc/), enter the "enterprise cultivation" scene of the (), enter the entrance of "national science and technology small and medium-sized enterprise declaration" in the scene of "enterprise cultivation", and complete the self-assessment in accordance with the "declaration guideline". 

(b) The Science and Technology Bureau of the municipalities in the district will confirm whether the materials of the enterprises are complete and whether the index conditions meet the requirements through the cockpit of "Enterprise Cultivation" of "Science and Technology Enterprises Growth Online" of Zhezheng Newspaper.
If it passes the confirmation, submit to the Provincial Science and Technology Department; if the information is incomplete or does not meet the requirements of index conditions, notify the enterprise online to make up for the incomplete information.
If the information is incomplete or does not meet the requirements of the indicators and conditions, the enterprise will be notified online to make corrections.
(C) The Provincial Science and Technology Department will carry out the public announcement of the enterprises to be included in the database every month.
Third, the time schedule
(a) Enterprises shall complete the system before September 30th. Encourage enterprises to participate in the evaluation of national science and technology-based small and medium-sized enterprises as early as possible, before May 31 (the deadline for enterprise income tax remittance) to obtain the registration number, and enjoy the national science and technology-based small and medium-sized enterprises in a timely manner to deduct R & D costs before tax special policy benefits.
(B) district municipal science and technology bureaus review and submit the deadline for October 10th.
Fourth, the work requirements 
(A) strict audit. District Municipal Science and Technology Bureau should strictly implement the evaluation conditions and procedures, strengthen the consistency and validity of the information related to the conditions of the through train validation, focusing on the evaluation system feedback risk alert information, strict quality control of enterprises. 
(ii) Doing what should be reported. The local science and technology bureaus shall, in accordance with the requirement of reporting, rely on the "intelligent selection" function of "Science and Technology Enterprises Growth Online" to fully explore and guide qualified high-tech enterprises and provincial science and technology-based small and medium-sized enterprises to participate in the evaluation of national science and technology-based small and medium-sized enterprises, and track the evaluation progress and provide good services in a timely manner. We will track the progress of evaluation in time and provide good services. 
(III) Strengthening policy publicity. The local science and technology bureaus should strengthen the national science and technology-oriented small and medium-sized enterprises.
The local science and technology bureaus should strengthen the publicity of the special policy on pre-tax deduction of R&D expenses for national science and technology-based SMEs, guide the enterprises to use the "enterprise research and development project information management system" to carry out deduction of R&D expenses, and solve the problems of setting up R&D auxiliary accounts, and collecting and accounting for R&D expenses. Technical Service Tel: 010-88656315, 010-88656316 
 
Attachment: National Science and Technology-based Small and Medium-sized Enterprises Evaluation Organizations in Regional Municipalities

 

RELATED NEWS


Five-axis milling and boring machining center machining characteristics

Five-axis milling and boring machining center process characteristics are determined by the production of the power head, mainly for drilling, tapping, boring, chamfering, milling, grinding and other types of processing to meet the processing needs of most customers. The power head is highly applicable and can be easily adjusted for different sized tools of the same type according to the type of tool used. Power head spindle with high rotary accuracy, good rigidity, no mechanical wear and vibration absorption, etc., suitable for cast iron, steel, non-ferrous metal materials, high machining accuracy can be combined with the stroke of the slide table to control the movement process of the power head, to meet the workpiece of a variety of modeling process characteristics. The guide rail and bed of the hard rail are integrated casting parts, and then the guide rail is processed on that basis, and then processed through quenching, grinding and then processed into the guide rail.


CNC lathe machining dimensions of the reasons for instability and solution measures

The so-called dimensional accuracy mainly refers to the degree of conformity between the dimensions of the workpiece and the dimensional requirements of the drawings after the completion of machining parts, so, in order to improve the dimensional accuracy of the parts in the operation of CNC machine tools, it is necessary to pay attention to the operating techniques in the operation of CNC machine tools, the dimensional accuracy of the parts of the commonly used methods of controlling the dimensional accuracy of the parts, such as the accurate tool setting, the adjustment of the tool wear compensation and the modification of the dimensional control accuracy in the program. Control accuracy, so that the size of the workpiece produced to be accurate.